National High-Tech Enterprise
Applications of over 1,000 users worldwide
Third-party authority testing and certification
Keywords： PTW series-wet dust collector PTSF Series-Intelligent Through Type Sandblasting Machine Industrial Centrifugal Separator-N Series
Global investment hotline：135-8686-7057
Switchboard hotline：0574-86168681
Contact
Headquarters switchboard hotline：0574-86168681
Global Investment Promotion Line：135-8686-7057
Email：info@pting-tech.com
Headquarter：No. 2, Jinhai North 3rd Road, Cixi Binhai Economic Development Zone, Ningbo City, Zhejiang Province
Beilun R&D Base：No. 21, Jiangjia'ao Industrial Zone, Xiaogang Street, Beilun District, Ningbo City, Zhejiang Province
Core advantages of porcelain plate: fire prevention+super weather resistance+ultra-high hardnessProcess core of porcelain plate coating preparation: high-quality sand blasting pretreatment+porcelain coating with convenient constructionAccording to different base materials, there are mainly three kinds of porcelain plates: porcelain aluminum plates, which are mainly used in the inner wall of rail locomotives, subway stations, airports, railway stations and other public buildings; There are also porcelain plates and porcelain stainless steel plates, which are mainly used in tunnels, column grids and other decoration fields with higher strength requirements. There is no release of any toxic gas when the porcelain plate is in fire, which greatly alleviates the harm of fire to human beings. At the same time, due to the low surface tension of the porcelain plate (surface tension 22-23 dyne), the plate can resist artificial pollution, prevent the pasting of small advertisements, and the marker can not be used for graffiti.At present, the pain points of the sand blasting pretreatment process of porcelain plate manufacturers are:1. Sand blasting equipment has poor stability, uneven sand blasting and low productivity;2. Sand blasting equipment has large energy consumption, large sand material consumption and high cost;3. The sandblasting equipment has poor environmental protection performance, the environmental protection discharge is not up to the standard, the production environment is bad, and operators are hard to find;4. The compatibility of sand blasting equipment is poor, and heterogeneous plates cannot pass through the equipment.The special sandblasting machine for porcelain veneers jointly developed by Patting Technology and an aluminum veneer enterprise in Jiangsu for 3 years has comprehensively solved the above pain points and brought good news to the majority of aluminum veneer manufacturers:1、 The technology of "rotary lifting spray gun module", which is the first in the world, perfectly solves the problem of uneven sand blasting with the traditional swing spray gun. At the same time, the compatibility range of the lifting spray gun module with the plate height reaches 10-400mm; The linear speed of aluminum plate sandblasting is up to 2.8-4M/min; Effective width up to 1600mm;2、 The technology of sedimentation type large air volume and low pressure dust remover+multi-stage cyclone separation and dust removal is adopted to solve the problem of dust overflow during sand blasting. At the same time, the particle size of abrasive separation can be finely adjusted to keep the surface roughness of the plate highly uniform. Save sand to the greatest extent.PT-DXL1650-36A special intelligent sandblasting machine for porcelain plateRotating lifting spray gun moduleSedimentary flow type large air volume low-pressure dust remover+cyclone separation dust removal system
China is the world’s largest exporter of home appliances, non-stick cookware, bakeware, pressure cooker, air fryer, buffet plate and other kitchen appliances accounted for more than 80% of the world’s exports Share, the preparation of non-stick coating is the core manufacturing process of this series of products, and it is also the core of the major domestic manufacturers to compete in the market. Paiting's R&D and manufacturing base is located in the domestic small home appliance base in Cixi, Ningbo, Zhejiang. The Paiting technology team visited the three domestic manufacturing bases of Yunfu, Zhejiang, and Zhejiang Yongkang. Research and research, and cooperation and docking with leading enterprises such as Supor, Guangdong Lingfeng, Kaibo Electric, etc., through years of accumulation and optimization, the research and development results have been remarkable, and Paiting Technology can currently provide first-class sandblasting equipment solutions for all enterprises. Paiting series sandblasting equipment can achieve three goals according to the different needs of customers: intelligent unmanned , The production efficiency is maximized, and the production environment is not optimal! Your browser does not support the video tag< /p> Your browser does not support the video tag< /p>
Not long ago, at the launch of the new iPhone series, the back cover of the mobile phone has adopted a new generation of ceramic bead blasted AG glass technology, which is delicate and moist to the touch. It has a thin, soft and comfortable feeling, and it also has the advantage that the glass material is not easy to be stained with fingerprints. With the advent of the 5G era, people have higher and higher requirements for the visual experience and aesthetics of mobile phones. The development of ceramic bead blasting AG glass technology has promoted the transformation of mobile phone back covers from traditional metal, plastic and other materials to AG glass. developing. When it comes to frosted glass made by AG process, everyone should be familiar with it. At present, high-end mobile phone brands such as Apple, Huawei, OPPO, OnePlus, etc. are all using it. On the recently released iPhone 11 Pro series, Apple made the glass on the back of the fuselage into a matte texture through the AG process, bringing a better feel. AG glass (Anti-Glareglass) is anti-glare glass, which refers to the special treatment of the glass surface by etching, coating, sandblasting or polishing, etc. Change the roughness of the glass surface, so that the surface has a matte effect and achieves the effect of diffuse reflection. The AG implementation method of early mobile phone glass cover is mainly chemical etching, such as Huawei's Mate20, OPPOR17pro, OnePlus 6, etc. But Chemical etching is expensive and relatively environmentally friendly. It is understood that the glass shell of the new model released by Apple on September 11 adopts a new generation process developed in cooperation with processing manufacturers - ceramic bead sandblasting (not the AG etching mentioned earlier), and the glass back cover of the iPhone 11pro series is also Switched from a glossy finish to a custom matte texture. Sandblasting Sandblasting is a process in which a mixture of sand and water is used as a medium and is sprayed on the surface of the glass by the pressure generated by a sandblasting machine. As early as 2018, an Apple patent called SurfaceFinishing was exposed, which showed that Apple was developing a new iPhone body processing process. The patent details the process, which involves sandblasting to create textured grooves in the body, although Apple uses ceramic beads instead of conventional sandblasting. Sand blasting The impact of the sand particles sprayed by the sandblasting machine on the surface of the workpiece makes the surface of the workpiece obtain a certain The smoothness and different roughness and particle size of the workpiece are improved, and the mechanical properties of the workpiece surface are improved, thus improving the relief of fatigue, and also increasing the adhesion between the coating and the coating, prolonging the durability of the coating film, which is also conducive to The leveling and decoration of coatings can remove impurities, variegated colors and oxide layers on the surface, and at the same time roughen the surface of the medium, make the surface of the substrate residual stress and improve the hardness of the surface of the substrate. At present, many domestic enterprises have mature technology and equipment, which have been used in many well-known brand mobile phones. The advantages of sandblasting are: The process flow is simplified, the production efficiency is high, and it is more environmentally friendly. Sandblasting can be used in a wider range and can also be used on ceramic cover plates. It is understood that Apple's new generation of Applewatch also uses sandblasting. With the release of Apple iPhonepro matte AG glass, a new generation of AG glass is sandblasted. Processing may become the mainstream process for surface treatment of 5G mobile phone casings in the future. With the advancement of technology, AG etching has become the mainstream technology of glass surface treatment Anti-blue light, can also be applied to the texture design of the glass surface. Zhejiang Paine Technology is a leading supplier of surface treatment equipment in China. Provide professional process technology and sandblasting equipment for global users. Welcome to inquire! The AG sandblasted glass sample made by Pairing Technology for Apple supplier Paine Technology AG special liquid sandblasting equipment for glass
Metal laser cutting, plasma cutting, fire welding cutting, and metal welding processes are widely used in various fields. For example, during laser cutting, a large amount of dust is generated when metal is melted at high speed. The dust contains common metals such as iron, copper, zinc, nickel, manganese, aluminum, tin, cadmium, lead, and titanium. Most of them will irritate your eyes, nose and throat. Others such as cadmium are known carcinogens. Some, such as lead and manganese, can damage your nerves and brain. The components of other metal fumes can also cause great damage to the kidneys. These fumes are condensed and suspended at a height of 2 meters on the ground, which is just within the scope of the human breathing area. Long-term inhalation will cause fibrous lesions in lung tissue, which is called welder's pneumoconiosis. Fully open laser cutting equipment uses the principle of range hood and uses the upper suction hood to collect smoke and dust Fully enclosed dust removal is currently an ideal state for laser cutting and even the entire dust control industry. Reasonable air supply and air intake design allow a stable air flow to be formed in a closed environment to 100% dust removal. 1. Smoke and dust analysis of laser cutting machine: ①The smoke and dust produced by laser cutting is 0.5 microns or more, and the smoke and dust produced during cutting have a high concentration. ②The temperature of smoke and dust can reach 80-150℃ (near the cutting point), with sparks and high concentration. ③Smoke and dust are small and light, easy to drift around and move irregularly. 2. Equipment selection design: ①The filter element of the dust collector adopts a special filter element for dry tobacco, with a filtration accuracy of 99.7% above 0.5μm, and a filtration wind speed of 1.3m/min. ②The air inlet of the dust collector needs to be equipped with a pre-processor, which is mainly used to eliminate sparks generated during laser cutting and prevent fires. ③The laser cutting table adopts a fully enclosed type, which maintains negative pressure at the inlet to prevent smoke and dust from overflowing. 3. Design example calculation Working chamber size of laser cutting equipment: 4.6*2.7*2.7m When the laser cutting equipment is fully enclosed, the size of the feed opening is 2.7*1.3m Import area F=2.7*1.3=3.51㎡ Ensure that the cross-sectional wind speed when the laser cutting soot is sucked away is 0.35m/s, The required air volume is Q=0.35*3.51*3600=4400m3/h, and the company’s CDX-LT-45 dust collector (air volume 4500-5800m3/h, total pressure 2600pa) can be selected. 4. Dust removal pipeline design According to the air volume of 4800m3/h, the wind speed at which the smoke and dust in the pipe can be transported is greater than 15m/s, and the pipe with a diameter of 300mm is selected.
Dust control methods in the polishing and grinding industry are currently divided into dry dust removal and wet dust removal on the market. The smart dry dust collector has accumulated rich process experience and a large number of User case, with the following advantages: 1. Safe and reliable: removing static electricity, secondary cyclones and subsidence, flame-retardant and explosion-proof combined supporting programs can truly realize safe production 2. Emission compliance: The emission concentration is less than 5mg, which can realize the secondary pollution of indoor unorganized emission and waterless dust removal 3. Energy saving and consumption saving: On average, each machine can save about 1 kilowatt of energy consumption, and the equipment investment is 30% lower than the investment cost of water dust removal 4. Economic benefits: Dry dust removal can be recycled and sold for colored polishing powders such as copper, zinc, and aluminum.
Welding workshops will generate a large amount of smoke and dust in daily production. The smoke and dust in welding smoke is a very complex substance. There are more than 211320 elements found in the smoke and dust. Among them, the most content is Fe, Ca, Na, etc., followed by Si, Al, Mn, Ti, Cu, etc. Welding fumes are extremely harmful to the environment and human health. The design goals and highlights of the welding fume dust removal system of Paiting Technology: 1. Implement the country's basic national policy on environmental protection and implement relevant national laws, policies, norms and standards; 2. According to the actual working conditions of the project, select the process route and design parameters suitable for the characteristics of the project, advanced technology, low investment, low operating cost, safe and reliable, and create a good working environment for employees. 3. The general layout of exhaust gas treatment facilities strives for reasonable layout, smooth process flow, beautiful process layout, and land saving, and strive to make the purification system a beautiful, highly automated, high-end atmospheric environmental protection treatment facility, and become an electric vehicle The model project in the manufacturing field achieves stable operation and stable compliance. 4. Tailor-made and optimize and upgrade the collection facilities of each station in the plant to achieve full collection of smoke and dust. 5. Introduce the most advanced purification facilities in the world to achieve low investment, high efficiency, low energy consumption, stability and reliability. This is the biggest highlight of the project. 6. The newly designed and installed purification device is planned to be installed between the two uprights, and a movable guide rail and a fixed guard frame are added. 7. The emission concentration of smoke and dust generated by welding in the workshop after purification and filtration is lower than 70% of the value specified in the "Comprehensive Emission Standard of Stationary Atmospheric Particulate Matter" DB37/1996-2011; 8. Collect and treat the smoke and dust in the welding area to the greatest extent, greatly improving the smoke concentration on the job site; 9. Ensure the continuous and stable operation of the smoke and dust exhaust gas treatment system, simple operation, high equipment intact rate and low failure rate; 10. Ensure that the overall design is optimized, reasonable, concise and beautiful, and create a healthy production concept; 11. Ensure low energy consumption and material consumption; low operating costs and low management costs. Whole factory welding smoke treatment case Whole factory welding smoke treatment case Robot post welding smoke treatment case Manual post welding fume control case Manual post welding fume control case Collection hose and rocker Collection hose and rocker Plasma cutting machine cover type collection Plasma cutting machine cover type collection Room style collection Room style collection Room style collection Patin welding fume dust removal host Patin welding fume dust removal host Patin welding fume dust removal host
500KW boiler blower for Shaanxi Weinan Power Plant450KW boiler induced draft fan of Shandong Tengzhou Hazardous Waste Incineration Power PlantJiaxing Petrochemical Self-provided Power Plant 1# Boiler 800KW BlowerJiaxing Petrochemical 2# steam boiler 800KW blower280KW desulfurization and denitrification fan for chemical plant's own power plant
The high temperature fan requires the material to be resistant to high temperature, not deformed, good shaft cooling and heat dissipation, flow air pressure temperature, and low vibration of the whole machine. The maximum temperature of Rosenberg fan can reach 800℃, the impeller is made of high-temperature resistant materials, the impeller is reasonable in design, and there is no deformation in long-term operation; the shaft system has good heat dissipation; the flow air pressure temperature and the vibration of the whole machine are low. Machine vibration: X direction 2.5mm/s Y direction 1.6mm/s Z direction 0.3mm/s Fan speed: 2978rpm High temperature fan at the client
Material fan is used as a more efficient material transportation, and is widely used in the light-weight material transportation industry to replace siphon fan. Its characteristic is that it can crush the belt-shaped material, thereby improving the conveying efficiency, without blocking the material, and the crushing blade is easy to replace. The crushing fan is used at the client's site
浙公网安备 33020602000372号
Technical Support：Yg1st
Traffic statistics: You are the 2054804 visitor to this site!
Chinese
